Phofo ea mica e sitsitsoeng ka metsi
Metsi Mica (Lisebelisoa tse Sebetsang)
| Seke | 'Mala | Bosweu (Laboratori) | Boholo ba Likaroloana (μm) | Bohloeki(%) | Lisebelisoa tsa makenete (ppm) | Mongobo (%) | LOI(650℃) | Ph | Li-osbestos | Karolo ea Tšepe e Boima | Bongata ba bongata (g/cm3) |
| Mica e Metsi (Lisebelisoa tse Sebetsang) | |||||||||||
| W-100 | Silevera e Tšoeu | ＞82 | 125 | ＞99.7 | 100 | 0.5 | 4.5～5.5 | 7.8 | NO | 10ppm | 0.22 |
| W-200 | Silevera e Tšoeu | ＞82 | 70 | ＞99.7 | 100 | 0.5 | 4.5～5.5 | 7.8 | NO | 10ppm | 0.19 |
| W-400 | Silevera e Tšoeu | ＞83 | 46 | ＞99.7 | 100 | 0.5 | 4.5～5.5 | 7.8 | NO | 10ppm | 0.16 |
| W-600 | Silevera e Tšoeu | ＞86 | 23 | ＞99.7 | 100 | 0.5 | 4.5～5.5 | 7.8 | NO | 10ppm | 0.12 |
Thepa ea Lik'hemik'hale
| SiO2 | Al2O3 | K2O | Na2O | MgO | CaO | TiO2 | Fe2O3 | PH |
| 48.5~50% | 30~34% | 8.5~9.8% | 0.6 ~ 0.7% | 0.53~0.81% | 0.4 ~ 0.6% | 0.8 ~ 0.9% | 1.5~4.5% | 7.8 |
Mosebetsi o ka Sehloohong oa Mica
Phofo ea mica ea Huajing ea boleng ba polasetiki, e sebelisoang haholo bakeng sa polasetiki ea boenjiniere ho eketsa modulus le ho tenyetseha ha eona; ho fokotsa ho fokotseha. Lefapheng la lisebelisoa tsa polasetiki tsa lihlahisoa tsa elektroniki, kamora ho eketsa mica, li ka ntlafatsoa haholoanyane hammoho le moralo. E ka ntlafatsa khanyetso ea boemo ba leholimo ea lihlahisoa tsa polasetiki, e le hore polasetiki ea boenjiniere e ka mamella liphapang tse kholo tsa mocheso le tikoloho; e ntlafatsa haholo insulation ho netefatsa ts'epo ea ts'ebetso ea motlakase ea motlakase o phahameng; E ka eketsa phallo ea lihlahisoa tse ling tsa polasetiki tse itseng hape.
Phofo ea mica e sitsitsoeng ka metsi e sebelisetsoa ho hloekisa lisebelisoa tse tala ka metsi le ho sila ka metsi e le bohareng, kahoo phofo e sitsitsoeng ka metsi e na le litšobotsi tse ntle ho feta phofo e sitsitsoeng ka metsi, joalo ka bosoeu bo botle, bokaholimo bo boreleli, bongata bo bonyenyane, sebopeho se tloaelehileng, karolelano e kholo ea bophara ho ea botenya le tse ling.
Tšebeliso ea Mica ho HDPE
Ho eketsoa ha mica ho HDPE ho ka boela ha fokotsa ho kena ha thepa, kahoo e loketse ho etsa mefuta eohle ea lijana, joalo ka tanka ea mafura a koloi le tse ling. Modulus ea ho seha sefofane ea li-composite tsa HDPE/ mica e eketseha haholo ka keketseho ea karolelano ea likarolo tsa maqephe a mica, ha modulus ea ho seha sefofane e fokotseha hanyane. Li-composite tsa HDPE tse tletseng phofo ea mica li na le thepa e felletseng ea mechini. Ka keketseho ea bongata ba phofo ea mica, matla a ho tensile, matla a ho kobeha le modulus ea ho kobeha ea li-composite li ile tsa eketseha.
Tšebeliso ea Phofo ea Mica ho ABS
ABS e sebelisitsoe haholo likoloing, puisanong, elektroniki, ts'ireletsong ea naha le mafapheng a mang. Kamora ho eketsa mica ho polasetiki ea boenjiniere ea ABS, ho tiea, ho hanyetsa ho tsofala le botsitso ba lik'hemik'hale ba ABS li ka ntlafala ka maemo a fapaneng. Ha ho eketsoa 30% ea mica, ha ho bapisoa le ABS e hloekileng, litšenyehelo tsa tlhahiso li fokotseha ka hoo e ka bang 20%, 'me matla a ho kobeha le matla a ho thaepa a thepa li ntlafala ka tsela e fapaneng. Ha litaba tsa mica e le 20%, modulus ea ho kobeha ea thepa e batla e le habeli ho feta ABS e hloekileng.
